Residential · Miami, FL
If the base of your stucco stays damp, cracks, or stains, the stucco weep screed and flashing details are often the real problem. Superior Stucco Miami has served Miami since 2018, repairing failed weep screeds, kick-out flashing, and stucco terminations so walls can drain and dry correctly.
Prep starts with finding the leak path, not just patching the finish. We inspect the weep screed line, stucco termination height above grade, window and door pan/flashing transitions, and any missing control joints that trap moisture. After protecting landscaping and hardscape, we remove loose or hollow stucco, expose the base, and verify the condition of the WRB (weather-resistive barrier), lath, and fasteners. We correct improper overlaps and damaged areas before rebuilding the assembly so the drainage plane is continuous down to the screed.
South Florida’s wind-driven rain and high humidity punish bad details at the bottom edge of stucco and around roof-to-wall intersections. We repair or replace corroded metal with code-appropriate components such as galvanized or stainless weep screed, flashing, and accessories, then integrate them with the WRB using compatible tapes and sealants where specified. Brown coat and finish coat are rebuilt to match thickness and texture, including sand-float, dash, lace, or smooth finishes, and we keep the screed’s weep holes open so moisture can exit. Color matching can be handled with integrally colored finish or acrylic paint systems depending on the existing wall and exposure.
Miami property owners call us when they want the details handled correctly, not hidden under caulk. We are licensed and insured, and we provide a clear written scope that lists the specific accessory types, fastener approach, and patch boundaries so you know what is being replaced. Our crews work clean, use proper mixing and curing practices, and treat water management as a system, including stucco flashing, WRB laps, sealant joints, and clearance to grade. You get straightforward recommendations when we find contributing issues like gutter overflow, negative slope at planters, or stucco buried below soil line.
Before we wrap, we walk the repair with you and document what was opened and rebuilt. You receive a written estimate up front, a defined work area, and practical next steps to reduce future moisture problems, such as maintaining a visible screed line and keeping mulch and soil below the termination. We also check adjacent areas for early signs of trouble, including efflorescence, blistering paint, and hairline cracking at corners and penetrations. The goal is a finished wall that looks consistent, drains properly, and is easier to maintain over time.
Yes. We are licensed and insured for stucco and exterior work, and we provide documentation upon request.
Yes. We provide a free written estimate after an on-site evaluation so the scope and materials are clear.
Small repairs can take a day or two, while larger restoration and re-stucco projects take longer due to prep, multiple coats, and curing time. We outline the schedule with your estimate.
Yes. We look for the moisture source first, often around sealant joints, flashing, or penetrations, then repair the stucco and recommend the right coating system to prevent recurrence.
We aim for a close match by blending texture and using compatible finish coats, but exact matches can vary due to weathering and paint fade. We can recommend repainting sections or full elevations when a uniform look is required.
A properly installed stucco weep screed is not decorative trim, it is a drainage and termination component that helps water exit the wall assembly at the bottom edge. When the screed is missing, buried, rusted through, or installed without a continuous weather-resistive barrier and flashing laps, moisture can wick into the stucco, swell the base, and lead to cracking, staining, and interior leaks. Superior Stucco Miami repairs weep screed and flashing details with a system approach so the wall can shed bulk water and dry between storms.
Most stucco weep screed problems show up at the base of walls, where sprinklers, planters, walkways, and soil keep the area wet. Common symptoms include soft or delaminated stucco at the bottom 6-12 inches, efflorescence, peeling paint, and recurring cracks that return after patching. We start by mapping moisture and damage, then open the affected sections to confirm what is happening behind the finish. From there we can repair the WRB, replace corroded lath, and install a properly integrated screed and flashing so the drainage plane has a clear exit point.
Flashing tie-ins matter just as much as the screed itself. Roof-to-wall transitions, kick-out flashing at eaves, window and door flashings, and sealant joints all have to direct water back to the exterior face of the WRB and down to the screed. Our repairs focus on correct sequencing and compatible materials, then we rebuild the base coat and finish coat to match your existing wall. If the wall has repeated moisture exposure, we can also recommend breathable coating options and maintenance steps that reduce future saturation.
If you suspect your stucco weep screed is buried, leaking, or failing, we can provide a clear written estimate and a repair plan that prioritizes water management and long-term durability. The result is a cleaner termination line, fewer recurring base failures, and a wall that performs the way stucco is supposed to in Miami’s wet season.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Miami. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
