Residential · Miami, FL
Traditional stucco is a proven, cement-based wall cladding that protects masonry and framed exteriors when it is built in the right layers. Superior Stucco Miami has served Miami since 2018, installing and repairing 3-coat and 2-coat traditional stucco systems for homes and commercial buildings.
Every traditional stucco job starts with correct prep and a stable base, not just new finish. We pressure wash and remove loose material, then repair substrates (CMU block, poured concrete, or wood framing) and address any movement cracks before coating. For framed walls, we install a water-resistive barrier (Grade D building paper or equivalent), self-furring galvanized expanded metal lath, weep screed at the base, and casing beads at terminations, then apply a scratch coat and brown coat to true the wall. We use proper mix ratios with Type I/II Portland cement, hydrated lime, and clean sand, controlling thickness to typical 3-coat totals around 7/8 inch where required by the assembly.
Miami’s heat, wind-driven rain, and salt air demand tight detailing and breathable finishes on traditional stucco. We integrate control joints where needed, seal penetrations, and make sure kick-out and flashing transitions do not trap water behind the cement plaster. Finish options include sand float, fine dash, and lace textures, and we can color-coat or prep for high-quality elastomeric paint systems that bridge hairline cracking without sealing the wall too tight. For patch repairs, we blend texture and color, feather edges, and match existing aggregate so the repaired areas read as one continuous wall, not a series of “spots.”
Miami customers choose us because we treat traditional stucco as a system, not a cosmetic skim coat. Licensed and insured, we focus on clean substrate prep, correct lath fastening schedules, consistent mixing, and curing practices that reduce shrinkage cracking and debonding. We are comfortable working around windows, balcony edges, soffits, parapets, and CMU tie-beams, and we know how to repair failure points like rusted corner bead, missing weep screed, hollow-sounding delamination, and recurring step cracks. You get clear scope, photos when helpful, and a plan that prioritizes water management before appearance.
To close out the project, we walk the elevation with you and review joints, terminations, and finish consistency in normal daylight. We clean the site daily, protect landscaping and hardscape, and confirm that downspouts, hose bibs, and penetrations are sealed and shedding water properly. You receive a free written estimate up front, then a documented scope, material selections, texture plan, and care guidance for curing and painting timelines. If we uncover hidden substrate damage during demolition, we show you the conditions and options before proceeding so there are no surprises.
Yes. We are licensed and insured for stucco and exterior work, and we provide documentation upon request.
Yes. We provide a free written estimate after an on-site evaluation so the scope and materials are clear.
Small repairs can take a day or two, while larger restoration and re-stucco projects take longer due to prep, multiple coats, and curing time. We outline the schedule with your estimate.
Yes. We look for the moisture source first, often around sealant joints, flashing, or penetrations, then repair the stucco and recommend the right coating system to prevent recurrence.
We aim for a close match by blending texture and using compatible finish coats, but exact matches can vary due to weathering and paint fade. We can recommend repainting sections or full elevations when a uniform look is required.
Traditional stucco, also called cement plaster, remains one of the most durable exterior claddings for South Florida when installed in the correct layers with proper water-shedding details. Superior Stucco Miami installs new traditional stucco and repairs failing cement stucco on homes, multifamily properties, and light commercial buildings, focusing on long-term performance, clean lines, and consistent texture.
Traditional stucco is a cement-based wall finish made from Portland cement, sand, lime, and water, applied in coats that cure into a hard, impact-resistant surface. On framed walls, performance depends on the entire assembly: water-resistive barrier, galvanized expanded metal lath, corrosion-resistant fasteners, and correctly placed accessories like weep screed and corner bead. On masonry and concrete, success depends on sound substrate, proper bonding, and repairing cracks that signal movement or moisture problems. We evaluate the wall first, then recommend targeted repairs or full resurfacing based on what the structure needs, not what is easiest to sell.
For installation, we keep coats uniform, straight, and plumb, and we pay attention to curing time so the stucco gains strength and resists premature cracking. For repairs, we remove hollow or debonded areas, treat rusted metal, rebuild base coats, and finish with a matched texture so the wall looks continuous. When painting is part of the plan, we coordinate surface prep and recommend breathable, exterior-grade coatings appropriate for cementitious substrates.
If you are seeing stair-step cracks, rust staining, bubbling paint, or soft areas near the base of the wall, traditional stucco repair should start with the cause, not just the symptoms. Request a free written estimate from Superior Stucco Miami and we will outline the scope, the materials, and the steps needed to restore a tight, durable cement stucco exterior.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Miami. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
